1. Guest, did you know that we are counting on you to become a actively participating member of our Club and Forum? Click here to see how:

Dismiss Notice
Welcome To ShrimpNFishFLorida
Dismiss Notice
In order to view Reports and Posts in the (R) restricted access threads of this forum you must sign up as a member
Dismiss Notice
Guest After signup you will need to make an Introduction Post. Thanks

Radar Mount Angle Adjustment

Discussion in 'Boat Build, Boat Projects... etc' started by Nautical Gator, Oct 20, 2017.


  1. Nautical Gator

    Nautical Gator Forum Captain, Moderator, Peacekeeper Staff Member
    Thread Started By

    Radar Mount Angle Adjustment

    When I installed my Seaview Radar mount, I did not adjust it, after being out a few time, I desided to adjust the angle by adding a wedge lowering the front and adding hight to the rear


    here is what a Seaview Radar Wedge looks like.
    upload_2017-10-20_15-5-20.png

    I decided to do a DIY wedge by cutting some starboard wedges. Will take some pics soon after I take the boat out a few times to see if I have the angle right?
    upload_2017-10-20_15-2-8.jpeg




    upload_2017-10-20_15-2-23.jpeg
     
  2. Nautical Gator

    Nautical Gator Forum Captain, Moderator, Peacekeeper Staff Member
    Thread Started By

    I made a 5/8" X 9" wedge
     
  3. shrimpmansteve

    shrimpmansteve Seaworthy

    Where do you get your starboard? I could use a piece cut to a circle with a diameter of about 15 inches.
     
  4. Nautical Gator

    Nautical Gator Forum Captain, Moderator, Peacekeeper Staff Member
    Thread Started By

    Surplus Unlimited in Daytona off of 92
     
  5. webeboatin

    webeboatin Pirate

    I second that. They really have the best prices locally. Only place better I have seen is sailorman in fort lauderdale where they have a large bin of cuts and charge you by the pound.
     
  6. Joseph Warga

    Joseph Warga Cabin Boy

    that's a sweet looking rig you got there..
     

Share This Page